Procurement of electronic components_ Integrated circuit IC_ Inductor_ Resistor_ Sensor_ Circuit protection_ semiconductor

86-755-23814471

Jin@mm-chips.com

取消

Home

Resistors(1464842)

Capacitors(1233524)

Inductors, Coils, Chokes(160301)

Potentiometers, Variable Resistors(31938)

Transformers(15404)

Crystals, Oscillators, Resonators(755151)

Discrete Semiconductor Products(252065)

Sensors, Transducers(174312)

Integrated Circuits (ICs)(656537)

RF and Wireless(109622)

Resistor Networks, Arrays(35407)

Through Hole Resistors(507425)

Chassis Mount Resistors(24591)

Specialized Resistors(820)

Capacitor Networks, Arrays(2073)

Aluminum Electrolytic Capacitors(119232)

Tantalum Capacitors(106098)

Ceramic Capacitors(802073)

Electric Double Layer Capacitors (EDLC), Supercapacitors(2508)

Film Capacitors(165215)

Mica and PTFE Capacitors(9477)

Trimmers, Variable Capacitors(1755)

Cal-Chip Electronics, Inc.

FMAT7483-10

Fairview Microwave

CHV1808N630472KXT

Cal-Chip Electronics, Inc.

Cal-Chip Electronics, Inc.

SMF-15S001-06

WAVEGUIDE SEC WR-15 50GHZ-75GHZ

MS366-10S-NS

36.6X34.1X3.3 MM RF SHIELD

FMIR1002

ISOLATOR SMA JACK 1.7GHZ-2.2GHZ

CHV1812N2K0471KXT

HVCAP1812 X7R 470PF 10% 2KV

CHV1812N1K0331KCT

HVCAP1812 COG 330PF 10% 1KV

FM9855B-10

WG ANTENNA WR-75 10-15 GHZ

CHV1808N630472KXT

HVCAP1808 X7R 4700PF 10% 630V

SA18NFNF50W-40

FXD ATTN JACK-JACK TYPE N 1.6

SA3D100-03

FXD ATTN PLUG-JACK 7/16 DIN 1.35

FM82P2009

PHASE SHIFTER 2.92MM 33 GHZ

FMWAN062-15NF

WG ANTENNA WG COAX ADAPT WR-62-T

FM2CP1134-10

COUPLER 2-52 GHZ 20 W 2.4MM

SMW28TF005-12

FLEXIBLE WG WR-28 26.5-40 GHZ

FM51028

ANTENNA TYPE N JACK 902 MHZ-928

SMW12TW1002

WG TWIST WR-12 60-90 GHZ UG-387/

FMSW6450

EM RELAY SWITCH 40 GHZ 28 V 2.92

SA18N-20

FXD ATTN PLUG-JACK TYPE N SS 1.3

MS366-10F-NS

36.6X34.1X3.3 MM RF FRAME

PMDM agent

YAGEO agent

EMIT agent

TE Connectivity AMP Connectors agent

Wickmann / Littelfuse agent

Intersil (Renesas Electronics Corporation) agent

B&K Precision agent

What are the characteristics of inductors?

On 2025-03-11 in 0

Characteristics of Inductors I. Introduction Inductors are fundamental components in electrical circuits, playing a crucial role in the management of current and energy. Defined as passive electrical devices that store energy in a magnetic field when electrical current flows through them, inductors are essential in various applications, from power supplies to radio frequency (RF) circuits. Understanding the characteristics of inductors is vital for engineers and hobbyists alike, as it influences circuit design and performance. This blog post will explore the key characteristics of inductors, including their basic principles, physical and electrical properties, performance metrics, and applications. II. Basic Principles of Inductance A. Definition of Inductance Inductance is the property of an electrical conductor that opposes changes in current. When the current flowing through an inductor changes, it induces a voltage in the opposite direction, according to Lenz's Law. This property is quantified in henries (H), with one henry defined as the inductance that induces one volt when the current changes at a rate of one ampere per second. B. The Role of Magnetic Fields in Inductors Inductors operate based on the principle of magnetic fields. When current flows through a coil of wire, it generates a magnetic field around it. The strength of this magnetic field is proportional to the amount of current flowing through the wire. The magnetic field stores energy, which can be released back into the circuit when the current decreases. C. Faraday's Law of Electromagnetic Induction Faraday's Law states that a change in magnetic flux through a circuit induces an electromotive force (EMF) in that circuit. This principle is fundamental to the operation of inductors, as the changing magnetic field created by the current in the inductor induces a voltage that opposes the change in current. D. Self-Inductance vs. Mutual Inductance Self-inductance refers to the phenomenon where a changing current in a coil induces a voltage in the same coil. In contrast, mutual inductance occurs when a changing current in one coil induces a voltage in a nearby coil. Both concepts are essential for understanding how inductors interact with each other in circuits. III. Physical Characteristics of Inductors A. Core Materials The core material of an inductor significantly affects its performance. Common core materials include: 1. **Air Core**: Air-core inductors have no magnetic material and are typically used in high-frequency applications due to their low losses. 2. **Ferrite Core**: Ferrite cores are made from a ceramic compound of iron oxide and other metals. They are commonly used in RF applications due to their high magnetic permeability and low losses at high frequencies. 3. **Iron Core**: Iron-core inductors are used in applications requiring high inductance values. They provide better magnetic coupling but can suffer from core losses at high frequencies. B. Wire Type and Gauge The type and gauge of wire used in an inductor also influence its performance: 1. **Enamel-Coated Wire**: This type of wire is commonly used for winding inductors due to its insulation properties and ability to handle high temperatures. 2. **Litz Wire**: Litz wire consists of many thin strands of wire twisted together. It reduces skin effect losses at high frequencies, making it ideal for RF applications. C. Inductor Shape and Size The shape and size of an inductor can affect its inductance and performance: 1. **Toroidal Inductors**: These inductors have a doughnut shape, which helps confine the magnetic field and reduce electromagnetic interference (EMI). 2. **Cylindrical Inductors**: These are straightforward in design and are often used in power applications. 3. **Planar Inductors**: These inductors are flat and are commonly used in surface-mount technology (SMT) applications. IV. Electrical Characteristics of Inductors A. Inductance Value (Measured in Henries) The inductance value is a critical characteristic of an inductor, determining how much energy it can store. Inductors are available in a wide range of inductance values, from microhenries (µH) to henries (H), depending on the application. B. Resistance and Reactance Inductors have both resistance and reactance. The resistance is the opposition to current flow due to the wire's material, while reactance is the opposition to changes in current due to inductance. The total impedance of an inductor is a combination of both resistance and reactance. C. Quality Factor (Q Factor) The quality factor, or Q factor, is a measure of an inductor's efficiency. It is defined as the ratio of the inductive reactance to the resistance at a specific frequency. A higher Q factor indicates lower energy losses and better performance, making it a desirable characteristic in high-frequency applications. D. Saturation Current Saturation current is the maximum current an inductor can handle before its core material becomes saturated, leading to a significant drop in inductance. Exceeding this current can result in overheating and damage to the inductor. E. Self-Resonant Frequency The self-resonant frequency is the frequency at which the inductive reactance and the parasitic capacitance of the inductor are equal, causing the inductor to behave like a resonant circuit. Beyond this frequency, the inductor's performance deteriorates, making it essential to consider in high-frequency applications. V. Performance Characteristics A. Frequency Response Inductors exhibit different behaviors at various frequencies: 1. **Behavior at Low Frequencies**: At low frequencies, inductors behave like short circuits, allowing current to pass through with minimal opposition. 2. **Behavior at High Frequencies**: At high frequencies, inductors exhibit increased reactance, which can limit current flow. The self-resonant frequency is a critical point where performance can degrade. B. Temperature Stability Inductors can be affected by temperature changes, which can alter their inductance and resistance. High-quality inductors are designed to maintain stable performance across a range of temperatures. C. Aging and Reliability Over time, inductors can experience changes in their characteristics due to factors like thermal cycling and mechanical stress. Understanding the aging characteristics of inductors is essential for ensuring long-term reliability in applications. VI. Applications of Inductors Inductors are used in a wide range of applications, including: A. Power Supplies Inductors are crucial in power supply circuits, where they help smooth out voltage fluctuations and store energy. B. Filters Inductors are used in filter circuits to block high-frequency signals while allowing low-frequency signals to pass, making them essential in audio and communication systems. C. Transformers Inductors are the building blocks of transformers, which transfer electrical energy between circuits through electromagnetic induction. D. Energy Storage Devices Inductors are used in energy storage applications, such as in inductive charging systems and energy recovery circuits. E. RF Applications In RF circuits, inductors are used for tuning and impedance matching, playing a vital role in the performance of antennas and transmitters. VII. Conclusion In summary, inductors are essential components in electrical circuits, with a wide range of characteristics that influence their performance and applications. Understanding the principles of inductance, physical and electrical properties, and performance metrics is crucial for effective circuit design. As technology advances, the development of new materials and designs will continue to enhance inductor performance, paving the way for innovative applications in various fields. VIII. References For further reading and a deeper understanding of inductors, consider exploring the following resources: 1. "The Art of Electronics" by Paul Horowitz and Winfield Hill 2. "Electromagnetic Fields and Waves" by Paul Lorrain and Dale Corson 3. IEEE Xplore Digital Library for academic papers on inductor technology and applications. By delving into these resources, you can expand your knowledge and stay updated on the latest trends in inductor technology.

What are the product standards for classification of inductors?

On 2025-03-10 in 0

What are the Product Standards for Classification of Inductors? I. Introduction Inductors are fundamental components in electronic circuits, playing a crucial role in energy storage, filtering, and signal processing. As passive components, they store energy in a magnetic field when electrical current flows through them. The importance of inductors cannot be overstated, as they are integral to the functioning of various devices, from power supplies to radio transmitters. Given their widespread use, product standards for the classification of inductors are essential. These standards ensure quality, reliability, and safety, facilitating international trade and promoting performance efficiency. II. Understanding Inductors A. Basic Principles of Inductance Inductance is defined as the property of an electrical conductor that opposes a change in current. When current flows through an inductor, it generates a magnetic field around it. The inductor's ability to store energy in this magnetic field is quantified by its inductance value, measured in henries (H). B. Types of Inductors Inductors come in various types, each suited for specific applications: 1. **Air-core inductors**: These inductors do not use a magnetic core, making them suitable for high-frequency applications due to their low losses. 2. **Iron-core inductors**: These utilize an iron core to increase inductance, making them ideal for low-frequency applications. 3. **Ferrite-core inductors**: Ferrite materials are used to enhance inductance while minimizing losses, commonly found in RF applications. 4. **Toroidal inductors**: Shaped like a doughnut, these inductors provide high inductance in a compact form, reducing electromagnetic interference. 5. **Variable inductors**: These allow for adjustable inductance, making them useful in tuning circuits. III. Importance of Product Standards Product standards are vital for several reasons: A. Ensuring Quality and Reliability Standards help manufacturers produce inductors that meet specific quality benchmarks, ensuring that they perform reliably in various applications. B. Facilitating International Trade With standardized products, manufacturers can sell inductors globally without the need for extensive modifications, simplifying the trade process. C. Promoting Safety and Compliance Standards ensure that inductors meet safety requirements, protecting users from potential hazards associated with electrical components. D. Enhancing Performance and Efficiency By adhering to established standards, manufacturers can optimize the performance of inductors, leading to more efficient electronic devices. IV. Key Product Standards for Inductors Several organizations develop and maintain standards relevant to inductors: A. International Electrotechnical Commission (IEC) Standards The IEC provides a framework for electrical and electronic standards globally. Specific IEC standards for inductors, such as IEC 60068, outline environmental testing methods to ensure reliability under various conditions. B. Institute of Electrical and Electronics Engineers (IEEE) Standards IEEE standards focus on the design and testing of electrical components, including inductors. These standards help ensure that inductors meet performance criteria essential for modern electronic applications. C. American National Standards Institute (ANSI) Standards ANSI plays a crucial role in the standardization of inductors in the United States. Their standards help ensure that inductors are manufactured to meet specific quality and performance criteria. D. Underwriters Laboratories (UL) Standards UL certification is a mark of safety and reliability. Inductors that meet UL standards have undergone rigorous testing to ensure they are safe for use in various applications. V. Classification Criteria for Inductors Inductors are classified based on several criteria: A. Electrical Characteristics 1. **Inductance value**: The primary characteristic, indicating how much energy the inductor can store. 2. **Current rating**: The maximum current the inductor can handle without overheating. 3. **Resistance and quality factor (Q)**: The resistance of the inductor affects its efficiency, while the Q factor indicates how well the inductor can store energy. B. Physical Characteristics 1. **Size and form factor**: The physical dimensions of the inductor can impact its application and integration into circuits. 2. **Material composition**: The materials used in the inductor affect its performance and suitability for specific applications. 3. **Thermal characteristics**: Inductors must be able to operate within specified temperature ranges to ensure reliability. C. Performance Characteristics 1. **Frequency response**: The ability of the inductor to operate effectively at different frequencies. 2. **Saturation current**: The maximum current at which the inductor can operate before its inductance begins to decrease. 3. **Self-resonant frequency**: The frequency at which the inductor's reactance equals its resistance, leading to a drop in performance. VI. Testing and Evaluation Methods To ensure inductors meet the required standards, various testing and evaluation methods are employed: A. Standard Testing Procedures for Inductors 1. **Inductance measurement**: This involves measuring the inductance value using specialized equipment. 2. **DC resistance measurement**: Assessing the resistance of the inductor helps determine its efficiency. 3. **Q factor measurement**: This test evaluates the inductor's performance in terms of energy storage. B. Environmental Testing 1. **Temperature and humidity testing**: Ensures that inductors can operate under varying environmental conditions. 2. **Vibration and shock testing**: Assesses the inductor's durability in real-world applications. C. Compliance Testing 1. **Safety and regulatory compliance**: Ensures that inductors meet safety standards set by regulatory bodies. 2. **Performance validation**: Confirms that inductors perform as expected under specified conditions. VII. Challenges in Standardization Despite the importance of standardization, several challenges persist: A. Variability in Manufacturing Processes Different manufacturing techniques can lead to variations in inductor performance, complicating standardization efforts. B. Rapid Technological Advancements As technology evolves, new materials and designs emerge, necessitating updates to existing standards. C. Globalization and Differing Regional Standards With manufacturers operating globally, differing regional standards can create confusion and complicate compliance. VIII. Future Trends in Inductor Standards The future of inductor standards is likely to be shaped by several trends: A. Emerging Technologies and Their Impact on Inductors Advancements in technology, such as the rise of electric vehicles and renewable energy systems, will drive the need for new inductor designs and standards. B. The Role of Digitalization in Standardization Digital tools and platforms can streamline the standardization process, making it easier to update and disseminate standards. C. Anticipated Changes in Regulatory Frameworks As environmental concerns grow, regulations may evolve to address sustainability and energy efficiency in inductor manufacturing. IX. Conclusion In conclusion, product standards for the classification of inductors are essential for ensuring quality, safety, and performance in electronic devices. As technology continues to advance, the need for ongoing standardization will remain critical. By adhering to established standards, manufacturers can produce reliable inductors that meet the demands of an evolving electronics landscape. The future of inductor classification and standards will likely be influenced by emerging technologies and the need for greater efficiency and sustainability. X. References 1. International Electrotechnical Commission (IEC) - [IEC Standards](https://www.iec.ch) 2. Institute of Electrical and Electronics Engineers (IEEE) - [IEEE Standards](https://www.ieee.org) 3. American National Standards Institute (ANSI) - [ANSI Standards](https://www.ansi.org) 4. Underwriters Laboratories (UL) - [UL Standards](https://www.ul.com) 5. Academic and industry publications on inductors and standards.

What are the mainstream models of inductor structures?

On 2025-03-09 in 0

What are the Mainstream Models of Inductor Structures? I. Introduction Inductors are fundamental components in electrical engineering, playing a crucial role in various applications, from power supplies to radio frequency (RF) circuits. An inductor is a passive electrical component that stores energy in a magnetic field when electric current flows through it. Understanding the different types of inductor structures and their characteristics is essential for engineers and designers to select the right component for their specific applications. This article will explore the mainstream models of inductor structures, their principles, types, modeling techniques, performance factors, applications, and future trends. II. Basic Principles of Inductance A. Definition of Inductance Inductance is the property of an electrical conductor that opposes a change in current. It is defined as the ratio of the induced electromotive force (EMF) in a circuit to the rate of change of current that produces it. The unit of inductance is the henry (H), named after the American scientist Joseph Henry. B. The Role of Magnetic Fields When current flows through a conductor, it generates a magnetic field around it. In an inductor, this magnetic field is concentrated and stored in a core material, which enhances the inductance. The strength of the magnetic field is proportional to the amount of current flowing through the inductor and the number of turns in the coil. C. Inductance Formula and Units The inductance (L) of a coil can be calculated using the formula: \[ L = \frac{N^2 \cdot \mu \cdot A}{l} \] Where: - \( N \) = number of turns in the coil - \( \mu \) = permeability of the core material - \( A \) = cross-sectional area of the coil - \( l \) = length of the coil III. Types of Inductor Structures Inductors come in various structures, each with its unique characteristics, advantages, and applications. A. Air-Core Inductors 1. Description and Construction Air-core inductors consist of a coil of wire wound around a non-magnetic core, typically air. They are simple in design and do not use any ferromagnetic materials. 2. Advantages and Disadvantages **Advantages:** - Low cost - High-frequency performance - No core losses **Disadvantages:** - Lower inductance values compared to core inductors - Larger physical size for the same inductance 3. Applications Air-core inductors are commonly used in RF applications, such as antennas and oscillators, where high-frequency performance is critical. B. Iron-Core Inductors 1. Description and Construction Iron-core inductors use a core made of iron or other ferromagnetic materials to enhance inductance. The core is typically laminated to reduce eddy current losses. 2. Advantages and Disadvantages **Advantages:** - Higher inductance values - Better energy storage capabilities **Disadvantages:** - Core losses at high frequencies - Saturation effects at high currents 3. Applications Iron-core inductors are widely used in power supply circuits and transformers, where high inductance and energy storage are required. C. Ferrite-Core Inductors 1. Description and Construction Ferrite-core inductors use ferrite materials, which are ceramic compounds made of iron oxide and other metals. These materials have high magnetic permeability and low losses at high frequencies. 2. Advantages and Disadvantages **Advantages:** - High inductance values with compact size - Low core losses at high frequencies **Disadvantages:** - Limited current handling capability - Susceptible to thermal degradation 3. Applications Ferrite-core inductors are commonly used in switch-mode power supplies, RF applications, and filters. D. Toroidal Inductors 1. Description and Construction Toroidal inductors are wound in a circular shape around a toroidal core, which can be made of air, iron, or ferrite. This design minimizes magnetic field leakage and enhances efficiency. 2. Advantages and Disadvantages **Advantages:** - Compact size with high inductance - Low electromagnetic interference (EMI) **Disadvantages:** - More complex manufacturing process - Higher cost compared to other inductors 3. Applications Toroidal inductors are used in power supplies, audio equipment, and RF applications where space is limited. E. Multilayer Inductors 1. Description and Construction Multilayer inductors consist of multiple layers of conductive and insulating materials, allowing for high inductance in a small footprint. They are often used in surface-mount technology (SMT). 2. Advantages and Disadvantages **Advantages:** - High inductance in a compact size - Suitable for automated assembly **Disadvantages:** - Limited current handling capability - Higher manufacturing costs 3. Applications Multilayer inductors are commonly found in mobile devices, laptops, and other compact electronic devices. F. Chip Inductors 1. Description and Construction Chip inductors are small, surface-mount inductors designed for high-density applications. They are typically made using thin-film or thick-film technology. 2. Advantages and Disadvantages **Advantages:** - Very compact size - Suitable for automated assembly **Disadvantages:** - Limited inductance values - Higher cost per unit 3. Applications Chip inductors are widely used in smartphones, tablets, and other compact electronic devices. IV. Inductor Modeling Techniques A. Ideal Inductor Model 1. Characteristics The ideal inductor model assumes that the inductor has no resistance, no parasitic capacitance, and no core losses. It behaves purely as a passive component that stores energy. 2. Limitations In reality, all inductors have some resistance and parasitic elements that affect their performance, especially at high frequencies. B. Non-Ideal Inductor Model 1. Parasitic Elements Non-ideal inductors include parasitic resistance (DC resistance), parasitic capacitance, and core losses, which can significantly impact their performance. 2. Impact on Performance These parasitic elements can lead to reduced efficiency, increased heat generation, and altered frequency response. C. SPICE Modeling 1. Overview of SPICE SPICE (Simulation Program with Integrated Circuit Emphasis) is a widely used simulation tool for modeling electronic circuits, including inductors. 2. Inductor Simulation in SPICE Inductors can be modeled in SPICE using ideal and non-ideal parameters, allowing engineers to simulate their behavior in various circuit configurations. V. Factors Influencing Inductor Performance A. Core Material The choice of core material significantly affects the inductance, efficiency, and frequency response of the inductor. B. Winding Configuration The number of turns, wire gauge, and winding technique can influence the inductance and resistance of the inductor. C. Frequency Response Inductors exhibit different behaviors at various frequencies, and their performance can degrade at high frequencies due to parasitic elements. D. Temperature Effects Temperature changes can affect the resistance of the wire and the magnetic properties of the core material, impacting the inductor's performance. VI. Applications of Inductors A. Power Supply Circuits Inductors are essential in power supply circuits for energy storage, filtering, and voltage regulation. B. RF Applications Inductors are used in RF circuits for tuning, filtering, and impedance matching. C. Filters and Oscillators Inductors are key components in filters and oscillators, helping to shape frequency response and generate specific frequencies. D. Energy Storage Systems Inductors are used in energy storage systems, such as inductive charging and energy harvesting applications. VII. Future Trends in Inductor Technology A. Miniaturization and Integration As electronic devices become smaller, there is a growing demand for miniaturized inductors that can be integrated into compact circuits. B. Advanced Materials Research into advanced materials, such as nanomaterials and composites, is paving the way for more efficient and higher-performance inductors. C. Smart Inductors The development of smart inductors that can adapt their characteristics based on operating conditions is an emerging trend in the industry. VIII. Conclusion Inductors are vital components in electrical engineering, with various structures and models available to suit different applications. Understanding the principles of inductance, the types of inductor structures, and their performance factors is essential for engineers and designers. As technology advances, the future of inductor technology promises exciting developments, including miniaturization, advanced materials, and smart inductors. By staying informed about these trends, professionals can make better design choices and contribute to the evolution of electronic systems. IX. References A. Academic Journals - IEEE Transactions on Power Electronics - Journal of Applied Physics B. Industry Publications - Electronic Design Magazine - EDN Network C. Textbooks on Electrical Engineering and Inductor Design - "Electrical Engineering: Principles and Applications" by Allan R. Hambley - "Inductor Design and Applications" by John Smith This comprehensive overview of inductor structures and their applications provides a solid foundation for understanding this essential component in electrical engineering.

How big is the market size of parallel inductors?

On 2025-03-08 in 0

86-755-23814471

Jin@mm-chips.com

基本文件流程错误 SQL 调试

/www/wwwroot/mm-chips.com/public/index.php ( 0.53 KB )
/www/wwwroot/mm-chips.com/vendor/autoload.php ( 0.75 KB )
/www/wwwroot/mm-chips.com/vendor/composer/autoload_real.php ( 1.63 KB )
/www/wwwroot/mm-chips.com/vendor/composer/platform_check.php ( 0.90 KB )
/www/wwwroot/mm-chips.com/vendor/composer/ClassLoader.php ( 15.99 KB )
/www/wwwroot/mm-chips.com/vendor/composer/autoload_static.php ( 272.06 KB )
/www/wwwroot/mm-chips.com/vendor/symfony/polyfill-mbstring/bootstrap.php ( 8.26 KB )
/www/wwwroot/mm-chips.com/vendor/symfony/polyfill-php80/bootstrap.php ( 1.50 KB )
/www/wwwroot/mm-chips.com/vendor/symfony/deprecation-contracts/function.php ( 0.98 KB )
/www/wwwroot/mm-chips.com/vendor/topthink/think-helper/src/helper.php ( 8.34 KB )
/www/wwwroot/mm-chips.com/vendor/symfony/translation/Resources/functions.php ( 0.55 KB )
/www/wwwroot/mm-chips.com/vendor/php-packages/money/src/helpers.php ( 1.07 KB )
/www/wwwroot/mm-chips.com/vendor/php-packages/icku-utils/src/helpers.php ( 30.57 KB )
/www/wwwroot/mm-chips.com/vendor/ralouphie/getallheaders/src/getallheaders.php ( 1.60 KB )
/www/wwwroot/mm-chips.com/vendor/guzzlehttp/guzzle/src/functions_include.php ( 0.16 KB )
/www/wwwroot/mm-chips.com/vendor/guzzlehttp/guzzle/src/functions.php ( 5.55 KB )
/www/wwwroot/mm-chips.com/vendor/topthink/think-orm/stubs/load_stubs.php ( 0.16 KB )
/www/wwwroot/mm-chips.com/vendor/topthink/framework/src/think/Exception.php ( 1.69 KB )
/www/wwwroot/mm-chips.com/vendor/topthink/framework/src/think/Facade.php ( 2.71 KB )
/www/wwwroot/mm-chips.com/vendor/php-packages/icku-gateway/src/helpers.php ( 2.09 KB )
/www/wwwroot/mm-chips.com/vendor/symfony/var-dumper/Resources/functions/dump.php ( 0.79 KB )
/www/wwwroot/mm-chips.com/vendor/ezyang/htmlpurifier/library/HTMLPurifier.composer.php ( 0.10 KB )
/www/wwwroot/mm-chips.com/vendor/tightenco/collect/src/Collect/Support/helpers.php ( 3.34 KB )
/www/wwwroot/mm-chips.com/vendor/tightenco/collect/src/Collect/Support/alias.php ( 1.49 KB )
/www/wwwroot/mm-chips.com/vendor/tightenco/collect/src/Collect/Contracts/Support/Arrayable.php ( 0.19 KB )
/www/wwwroot/mm-chips.com/vendor/tightenco/collect/src/Collect/Contracts/Support/Jsonable.php ( 0.24 KB )
/www/wwwroot/mm-chips.com/vendor/tightenco/collect/src/Collect/Contracts/Support/Htmlable.php ( 0.19 KB )
/www/wwwroot/mm-chips.com/vendor/tightenco/collect/src/Collect/Contracts/Support/CanBeEscapedWhenCastToString.php ( 0.33 KB )
/www/wwwroot/mm-chips.com/vendor/tightenco/collect/src/Collect/Support/Arr.php ( 17.85 KB )
/www/wwwroot/mm-chips.com/vendor/tightenco/collect/src/Collect/Support/Traits/Macroable.php ( 2.79 KB )
/www/wwwroot/mm-chips.com/vendor/tightenco/collect/src/Collect/Support/Collection.php ( 39.00 KB )
/www/wwwroot/mm-chips.com/vendor/tightenco/collect/src/Collect/Support/Enumerable.php ( 23.83 KB )
/www/wwwroot/mm-chips.com/vendor/tightenco/collect/src/Collect/Support/Traits/EnumeratesValues.php ( 27.80 KB )
/www/wwwroot/mm-chips.com/vendor/tightenco/collect/src/Collect/Support/HigherOrderCollectionProxy.php ( 1.40 KB )
/www/wwwroot/mm-chips.com/vendor/tightenco/collect/src/Collect/Support/HigherOrderWhenProxy.php ( 1.30 KB )
/www/wwwroot/mm-chips.com/vendor/tightenco/collect/src/Collect/Support/LazyCollection.php ( 38.27 KB )
/www/wwwroot/mm-chips.com/vendor/php-packages/icku-application/src/helpers.php ( 0.01 KB )
/www/wwwroot/mm-chips.com/vendor/topthink/think-captcha/src/helper.php ( 1.37 KB )
/www/wwwroot/mm-chips.com/app/core/func/functions.php ( 7.48 KB )
/www/wwwroot/mm-chips.com/vendor/topthink/framework/src/think/App.php ( 14.17 KB )
/www/wwwroot/mm-chips.com/vendor/topthink/framework/src/think/Container.php ( 15.38 KB )
/www/wwwroot/mm-chips.com/vendor/psr/container/src/ContainerInterface.php ( 1.02 KB )
/www/wwwroot/mm-chips.com/app/provider.php ( 0.20 KB )
/www/wwwroot/mm-chips.com/vendor/topthink/framework/src/think/Http.php ( 6.12 KB )
/www/wwwroot/mm-chips.com/vendor/topthink/think-helper/src/helper/Str.php ( 7.29 KB )
/www/wwwroot/mm-chips.com/vendor/topthink/framework/src/think/Env.php ( 4.64 KB )
/www/wwwroot/mm-chips.com/app/common.php ( 3.72 KB )
/www/wwwroot/mm-chips.com/vendor/topthink/framework/src/helper.php ( 18.44 KB )
/www/wwwroot/mm-chips.com/vendor/topthink/framework/src/think/Config.php ( 5.03 KB )
/www/wwwroot/mm-chips.com/config/app.php ( 1.81 KB )
/www/wwwroot/mm-chips.com/vendor/topthink/framework/src/think/facade/Env.php ( 1.67 KB )
/www/wwwroot/mm-chips.com/config/cache.php ( 1.21 KB )
/www/wwwroot/mm-chips.com/config/captcha.php ( 1.06 KB )
/www/wwwroot/mm-chips.com/config/console.php ( 0.45 KB )
/www/wwwroot/mm-chips.com/config/cookie.php ( 0.49 KB )
/www/wwwroot/mm-chips.com/config/database.php ( 2.22 KB )
/www/wwwroot/mm-chips.com/config/filesystem.php ( 0.63 KB )
/www/wwwroot/mm-chips.com/config/lang.php ( 0.81 KB )
/www/wwwroot/mm-chips.com/config/log.php ( 1.78 KB )
/www/wwwroot/mm-chips.com/config/middleware.php ( 0.19 KB )
/www/wwwroot/mm-chips.com/config/route.php ( 1.59 KB )
/www/wwwroot/mm-chips.com/config/session.php ( 0.57 KB )
/www/wwwroot/mm-chips.com/config/sitemap.php ( 1.69 KB )
/www/wwwroot/mm-chips.com/config/trace.php ( 0.34 KB )
/www/wwwroot/mm-chips.com/config/view.php ( 0.82 KB )
/www/wwwroot/mm-chips.com/app/event.php ( 0.40 KB )
/www/wwwroot/mm-chips.com/vendor/topthink/framework/src/think/Event.php ( 6.96 KB )
/www/wwwroot/mm-chips.com/app/service.php ( 0.19 KB )
/www/wwwroot/mm-chips.com/app/AppService.php ( 0.28 KB )
/www/wwwroot/mm-chips.com/vendor/topthink/framework/src/think/Service.php ( 1.67 KB )
/www/wwwroot/mm-chips.com/vendor/php-packages/icku-gateway/src/Api/Service/GatewayService.php ( 0.50 KB )
/www/wwwroot/mm-chips.com/vendor/topthink/framework/src/think/Lang.php ( 7.60 KB )
/www/wwwroot/mm-chips.com/vendor/topthink/framework/src/lang/zh-cn.php ( 12.88 KB )
/www/wwwroot/mm-chips.com/vendor/topthink/framework/src/think/initializer/Error.php ( 3.27 KB )
/www/wwwroot/mm-chips.com/vendor/topthink/framework/src/think/initializer/RegisterService.php ( 1.33 KB )
/www/wwwroot/mm-chips.com/vendor/services.php ( 0.21 KB )
/www/wwwroot/mm-chips.com/vendor/topthink/framework/src/think/service/PaginatorService.php ( 1.52 KB )
/www/wwwroot/mm-chips.com/vendor/topthink/framework/src/think/service/ValidateService.php ( 0.99 KB )
/www/wwwroot/mm-chips.com/vendor/topthink/framework/src/think/service/ModelService.php ( 1.76 KB )
/www/wwwroot/mm-chips.com/vendor/topthink/think-captcha/src/CaptchaService.php ( 0.52 KB )
/www/wwwroot/mm-chips.com/vendor/topthink/think-multi-app/src/Service.php ( 1.08 KB )
/www/wwwroot/mm-chips.com/vendor/topthink/think-trace/src/Service.php ( 0.77 KB )
/www/wwwroot/mm-chips.com/vendor/topthink/framework/src/think/Middleware.php ( 6.78 KB )
/www/wwwroot/mm-chips.com/vendor/topthink/framework/src/think/initializer/BootService.php ( 0.77 KB )
/www/wwwroot/mm-chips.com/vendor/topthink/think-orm/src/Paginator.php ( 11.80 KB )
/www/wwwroot/mm-chips.com/vendor/topthink/framework/src/think/Validate.php ( 46.10 KB )
/www/wwwroot/mm-chips.com/vendor/topthink/think-orm/src/Model.php ( 25.67 KB )
/www/wwwroot/mm-chips.com/vendor/topthink/think-helper/src/contract/Arrayable.php ( 0.09 KB )
/www/wwwroot/mm-chips.com/vendor/topthink/think-helper/src/contract/Jsonable.php ( 0.13 KB )
/www/wwwroot/mm-chips.com/vendor/topthink/think-orm/src/model/concern/Attribute.php ( 17.61 KB )
/www/wwwroot/mm-chips.com/vendor/topthink/think-orm/src/model/concern/RelationShip.php ( 26.12 KB )
/www/wwwroot/mm-chips.com/vendor/topthink/think-orm/src/model/concern/ModelEvent.php ( 2.27 KB )
/www/wwwroot/mm-chips.com/vendor/topthink/think-orm/src/model/concern/TimeStamp.php ( 5.70 KB )
/www/wwwroot/mm-chips.com/vendor/topthink/think-orm/src/model/concern/Conversion.php ( 10.41 KB )
/www/wwwroot/mm-chips.com/vendor/topthink/framework/src/think/Db.php ( 2.87 KB )
/www/wwwroot/mm-chips.com/vendor/topthink/think-orm/src/DbManager.php ( 8.28 KB )
/www/wwwroot/mm-chips.com/vendor/topthink/framework/src/think/Log.php ( 8.50 KB )
/www/wwwroot/mm-chips.com/vendor/topthink/framework/src/think/Manager.php ( 3.98 KB )
/www/wwwroot/mm-chips.com/vendor/psr/log/Psr/Log/LoggerInterface.php ( 3.04 KB )
/www/wwwroot/mm-chips.com/vendor/topthink/framework/src/think/Cache.php ( 4.79 KB )
/www/wwwroot/mm-chips.com/vendor/psr/simple-cache/src/CacheInterface.php ( 4.50 KB )
/www/wwwroot/mm-chips.com/vendor/topthink/think-helper/src/helper/Arr.php ( 16.08 KB )
/www/wwwroot/mm-chips.com/vendor/topthink/framework/src/think/cache/driver/File.php ( 7.42 KB )
/www/wwwroot/mm-chips.com/vendor/topthink/framework/src/think/cache/Driver.php ( 8.06 KB )
/www/wwwroot/mm-chips.com/vendor/topthink/framework/src/think/contract/CacheHandlerInterface.php ( 2.25 KB )
/www/wwwroot/mm-chips.com/vendor/topthink/framework/src/think/Console.php ( 22.65 KB )
/www/wwwroot/mm-chips.com/app/Request.php ( 0.09 KB )
/www/wwwroot/mm-chips.com/vendor/topthink/framework/src/think/Request.php ( 54.04 KB )
/www/wwwroot/mm-chips.com/app/middleware.php ( 0.31 KB )
/www/wwwroot/mm-chips.com/vendor/topthink/framework/src/think/Pipeline.php ( 2.61 KB )
/www/wwwroot/mm-chips.com/vendor/topthink/think-trace/src/TraceDebug.php ( 2.94 KB )
/www/wwwroot/mm-chips.com/vendor/topthink/framework/src/think/middleware/SessionInit.php ( 2.06 KB )
/www/wwwroot/mm-chips.com/vendor/topthink/framework/src/think/Session.php ( 1.80 KB )
/www/wwwroot/mm-chips.com/vendor/topthink/framework/src/think/session/driver/File.php ( 6.28 KB )
/www/wwwroot/mm-chips.com/vendor/topthink/framework/src/think/contract/SessionHandlerInterface.php ( 0.87 KB )
/www/wwwroot/mm-chips.com/vendor/topthink/framework/src/think/session/Store.php ( 7.26 KB )
/www/wwwroot/mm-chips.com/app/middleware/CrossDomain.php ( 0.27 KB )
/www/wwwroot/mm-chips.com/vendor/topthink/think-multi-app/src/MultiApp.php ( 7.06 KB )
/www/wwwroot/mm-chips.com/app/index/common.php ( 0.01 KB )
/www/wwwroot/mm-chips.com/vendor/topthink/framework/src/think/Route.php ( 23.96 KB )
/www/wwwroot/mm-chips.com/vendor/topthink/framework/src/think/route/RuleName.php ( 5.33 KB )
/www/wwwroot/mm-chips.com/vendor/topthink/framework/src/think/route/Domain.php ( 5.55 KB )
/www/wwwroot/mm-chips.com/vendor/topthink/framework/src/think/route/RuleGroup.php ( 13.61 KB )
/www/wwwroot/mm-chips.com/vendor/topthink/framework/src/think/route/Rule.php ( 22.85 KB )
/www/wwwroot/mm-chips.com/vendor/topthink/framework/src/think/route/RuleItem.php ( 8.81 KB )
/www/wwwroot/mm-chips.com/app/index/route/index.php ( 4.14 KB )
/www/wwwroot/mm-chips.com/vendor/topthink/framework/src/think/facade/Route.php ( 4.88 KB )
/www/wwwroot/mm-chips.com/vendor/topthink/framework/src/think/route/dispatch/Controller.php ( 6.61 KB )
/www/wwwroot/mm-chips.com/vendor/topthink/framework/src/think/route/Dispatch.php ( 6.49 KB )
/www/wwwroot/mm-chips.com/app/index/controller/Index.php ( 5.43 KB )
/www/wwwroot/mm-chips.com/app/index/controller/Common.php ( 7.23 KB )
/www/wwwroot/mm-chips.com/vendor/php-packages/icku-utils/src/Utils/Setting.php ( 4.59 KB )
/www/wwwroot/mm-chips.com/vendor/topthink/framework/src/think/facade/Cache.php ( 2.02 KB )
/www/wwwroot/mm-chips.com/vendor/topthink/think-orm/src/facade/Db.php ( 0.94 KB )
/www/wwwroot/mm-chips.com/vendor/topthink/think-orm/src/db/connector/Mysql.php ( 4.39 KB )
/www/wwwroot/mm-chips.com/vendor/topthink/think-orm/src/db/PDOConnection.php ( 52.45 KB )
/www/wwwroot/mm-chips.com/vendor/topthink/think-orm/src/db/Connection.php ( 7.67 KB )
/www/wwwroot/mm-chips.com/vendor/topthink/think-orm/src/db/ConnectionInterface.php ( 4.56 KB )
/www/wwwroot/mm-chips.com/vendor/topthink/think-orm/src/db/builder/Mysql.php ( 15.93 KB )
/www/wwwroot/mm-chips.com/vendor/topthink/think-orm/src/db/Builder.php ( 41.58 KB )
/www/wwwroot/mm-chips.com/vendor/topthink/think-orm/src/db/Query.php ( 10.64 KB )
/www/wwwroot/mm-chips.com/vendor/topthink/think-orm/src/db/BaseQuery.php ( 36.47 KB )
/www/wwwroot/mm-chips.com/vendor/topthink/think-orm/src/db/concern/TimeFieldQuery.php ( 7.50 KB )
/www/wwwroot/mm-chips.com/vendor/topthink/think-orm/src/db/concern/AggregateQuery.php ( 3.26 KB )
/www/wwwroot/mm-chips.com/vendor/topthink/think-orm/src/db/concern/ModelRelationQuery.php ( 16.06 KB )
/www/wwwroot/mm-chips.com/vendor/topthink/think-orm/src/db/concern/ResultOperation.php ( 6.29 KB )
/www/wwwroot/mm-chips.com/vendor/topthink/think-orm/src/db/concern/Transaction.php ( 2.85 KB )
/www/wwwroot/mm-chips.com/vendor/topthink/think-orm/src/db/concern/WhereQuery.php ( 16.22 KB )
/www/wwwroot/mm-chips.com/vendor/topthink/think-orm/src/db/concern/JoinAndViewQuery.php ( 6.86 KB )
/www/wwwroot/mm-chips.com/vendor/topthink/think-orm/src/db/concern/ParamsBind.php ( 3.36 KB )
/www/wwwroot/mm-chips.com/vendor/topthink/think-orm/src/db/concern/TableFieldInfo.php ( 2.51 KB )
/www/wwwroot/mm-chips.com/vendor/topthink/framework/src/think/facade/Cookie.php ( 1.49 KB )
/www/wwwroot/mm-chips.com/vendor/topthink/framework/src/think/Cookie.php ( 6.28 KB )
/www/wwwroot/mm-chips.com/vendor/topthink/framework/src/think/log/driver/File.php ( 6.17 KB )
/www/wwwroot/mm-chips.com/vendor/topthink/framework/src/think/contract/LogHandlerInterface.php ( 0.86 KB )
/www/wwwroot/mm-chips.com/vendor/topthink/framework/src/think/log/Channel.php ( 6.54 KB )
/www/wwwroot/mm-chips.com/vendor/topthink/framework/src/think/event/LogRecord.php ( 0.86 KB )
/www/wwwroot/mm-chips.com/vendor/topthink/framework/src/think/event/LogWrite.php ( 0.88 KB )
/www/wwwroot/mm-chips.com/vendor/php-packages/icku-gateway/src/Api/Facade/Gateway.php ( 2.34 KB )
/www/wwwroot/mm-chips.com/vendor/php-packages/icku-gateway/src/Api/Manager.php ( 5.18 KB )
/www/wwwroot/mm-chips.com/vendor/php-packages/icku-gateway/src/Api/Http/Client.php ( 4.09 KB )
/www/wwwroot/mm-chips.com/vendor/php-packages/http-client/src/Http/Client.php ( 7.51 KB )
/www/wwwroot/mm-chips.com/vendor/php-packages/http-client/src/Http/ConfigTrait.php ( 4.67 KB )
/www/wwwroot/mm-chips.com/vendor/php-packages/icku-gateway/src/Api/Http/Response.php ( 1.59 KB )
/www/wwwroot/mm-chips.com/vendor/php-packages/http-client/src/Http/Response.php ( 7.43 KB )
/www/wwwroot/mm-chips.com/vendor/psr/log/Psr/Log/NullLogger.php ( 0.69 KB )
/www/wwwroot/mm-chips.com/vendor/psr/log/Psr/Log/AbstractLogger.php ( 3.03 KB )
/www/wwwroot/mm-chips.com/vendor/psr/log/Psr/Log/LogLevel.php ( 0.33 KB )
/www/wwwroot/mm-chips.com/vendor/php-packages/icku-gateway/src/Api/Cache.php ( 0.95 KB )
/www/wwwroot/mm-chips.com/vendor/desarrolla2/cache/src/Memory.php ( 3.13 KB )
/www/wwwroot/mm-chips.com/vendor/desarrolla2/cache/src/AbstractCache.php ( 6.92 KB )
/www/wwwroot/mm-chips.com/vendor/desarrolla2/cache/src/CacheInterface.php ( 1.20 KB )
/www/wwwroot/mm-chips.com/vendor/desarrolla2/cache/src/Option/PrefixTrait.php ( 0.85 KB )
/www/wwwroot/mm-chips.com/vendor/desarrolla2/cache/src/Option/TtlTrait.php ( 1.09 KB )
/www/wwwroot/mm-chips.com/vendor/desarrolla2/cache/src/Packer/PackingTrait.php ( 1.75 KB )
/www/wwwroot/mm-chips.com/vendor/php-packages/icku-gateway/src/Api/Setting.php ( 1.80 KB )
/www/wwwroot/mm-chips.com/vendor/topthink/framework/src/think/facade/Log.php ( 2.94 KB )
/www/wwwroot/mm-chips.com/vendor/php-packages/icku-gateway/src/Api/Enums/Locale.php ( 6.63 KB )
/www/wwwroot/mm-chips.com/vendor/php-packages/icku-utils/src/Utils/Enum.php ( 4.59 KB )
/www/wwwroot/mm-chips.com/vendor/myclabs/php-enum/src/Enum.php ( 8.00 KB )
/www/wwwroot/mm-chips.com/vendor/myclabs/php-enum/stubs/Stringable.php ( 0.20 KB )
/www/wwwroot/mm-chips.com/vendor/topthink/think-helper/src/Collection.php ( 16.48 KB )
/www/wwwroot/mm-chips.com/app/index/model/SinglePage.php ( 0.11 KB )
/www/wwwroot/mm-chips.com/app/core/base/BaseApiModel.php ( 2.39 KB )
/www/wwwroot/mm-chips.com/vendor/topthink/think-orm/src/model/Collection.php ( 6.78 KB )
/www/wwwroot/mm-chips.com/vendor/topthink/framework/src/think/facade/View.php ( 1.71 KB )
/www/wwwroot/mm-chips.com/vendor/topthink/framework/src/think/View.php ( 4.41 KB )
/www/wwwroot/mm-chips.com/app/index/model/Link.php ( 0.11 KB )
/www/wwwroot/mm-chips.com/vendor/topthink/framework/src/think/facade/Config.php ( 1.37 KB )
/www/wwwroot/mm-chips.com/vendor/php-packages/icku-gateway/src/Api/Endpoints/DefaultEndpoint.php ( 3.54 KB )
/www/wwwroot/mm-chips.com/vendor/php-packages/icku-gateway/src/Api/Endpoints/Endpoint.php ( 4.80 KB )
/www/wwwroot/mm-chips.com/vendor/symfony/polyfill-php80/Php80.php ( 3.49 KB )
/www/wwwroot/mm-chips.com/vendor/php-packages/icku-gateway/src/Api/Entities/IndexDataEntity.php ( 0.84 KB )
/www/wwwroot/mm-chips.com/vendor/php-packages/icku-gateway/src/Api/Entities/Entity.php ( 17.78 KB )
/www/wwwroot/mm-chips.com/vendor/guzzlehttp/guzzle/src/Client.php ( 18.00 KB )
/www/wwwroot/mm-chips.com/vendor/guzzlehttp/guzzle/src/ClientInterface.php ( 2.83 KB )
/www/wwwroot/mm-chips.com/vendor/psr/http-client/src/ClientInterface.php ( 0.49 KB )
/www/wwwroot/mm-chips.com/vendor/guzzlehttp/guzzle/src/ClientTrait.php ( 8.79 KB )
/www/wwwroot/mm-chips.com/vendor/guzzlehttp/guzzle/src/HandlerStack.php ( 8.51 KB )
/www/wwwroot/mm-chips.com/vendor/guzzlehttp/guzzle/src/Utils.php ( 12.86 KB )
/www/wwwroot/mm-chips.com/vendor/guzzlehttp/guzzle/src/Handler/Proxy.php ( 2.23 KB )
/www/wwwroot/mm-chips.com/vendor/guzzlehttp/guzzle/src/Handler/CurlMultiHandler.php ( 8.49 KB )
/www/wwwroot/mm-chips.com/vendor/guzzlehttp/guzzle/src/Handler/CurlFactory.php ( 27.49 KB )
/www/wwwroot/mm-chips.com/vendor/guzzlehttp/guzzle/src/Handler/CurlFactoryInterface.php ( 0.64 KB )
/www/wwwroot/mm-chips.com/vendor/guzzlehttp/guzzle/src/Handler/CurlHandler.php ( 1.30 KB )
/www/wwwroot/mm-chips.com/vendor/guzzlehttp/guzzle/src/Handler/StreamHandler.php ( 21.10 KB )
/www/wwwroot/mm-chips.com/vendor/guzzlehttp/guzzle/src/Middleware.php ( 10.90 KB )
/www/wwwroot/mm-chips.com/vendor/guzzlehttp/guzzle/src/RedirectMiddleware.php ( 7.92 KB )
/www/wwwroot/mm-chips.com/vendor/guzzlehttp/psr7/src/Uri.php ( 21.44 KB )
/www/wwwroot/mm-chips.com/vendor/psr/http-message/src/UriInterface.php ( 12.39 KB )
/www/wwwroot/mm-chips.com/vendor/guzzlehttp/guzzle/src/RequestOptions.php ( 10.70 KB )
/www/wwwroot/mm-chips.com/vendor/guzzlehttp/psr7/src/Utils.php ( 15.57 KB )
/www/wwwroot/mm-chips.com/vendor/guzzlehttp/psr7/src/Request.php ( 3.82 KB )
/www/wwwroot/mm-chips.com/vendor/psr/http-message/src/RequestInterface.php ( 4.75 KB )
/www/wwwroot/mm-chips.com/vendor/psr/http-message/src/MessageInterface.php ( 6.82 KB )
/www/wwwroot/mm-chips.com/vendor/guzzlehttp/psr7/src/MessageTrait.php ( 7.56 KB )
/www/wwwroot/mm-chips.com/vendor/guzzlehttp/psr7/src/Stream.php ( 7.21 KB )
/www/wwwroot/mm-chips.com/vendor/psr/http-message/src/StreamInterface.php ( 4.69 KB )
/www/wwwroot/mm-chips.com/vendor/guzzlehttp/promises/src/Create.php ( 1.96 KB )
/www/wwwroot/mm-chips.com/vendor/guzzlehttp/guzzle/src/PrepareBodyMiddleware.php ( 3.05 KB )
/www/wwwroot/mm-chips.com/vendor/guzzlehttp/guzzle/src/Handler/EasyHandle.php ( 2.83 KB )
/www/wwwroot/mm-chips.com/vendor/guzzlehttp/guzzle/src/Handler/HeaderProcessor.php ( 1.03 KB )
/www/wwwroot/mm-chips.com/vendor/guzzlehttp/psr7/src/Response.php ( 4.79 KB )
/www/wwwroot/mm-chips.com/vendor/psr/http-message/src/ResponseInterface.php ( 2.57 KB )
/www/wwwroot/mm-chips.com/vendor/guzzlehttp/promises/src/FulfilledPromise.php ( 2.00 KB )
/www/wwwroot/mm-chips.com/vendor/guzzlehttp/promises/src/PromiseInterface.php ( 2.76 KB )
/www/wwwroot/mm-chips.com/vendor/guzzlehttp/promises/src/Utils.php ( 8.18 KB )
/www/wwwroot/mm-chips.com/vendor/guzzlehttp/promises/src/TaskQueue.php ( 1.97 KB )
/www/wwwroot/mm-chips.com/vendor/guzzlehttp/promises/src/TaskQueueInterface.php ( 0.44 KB )
/www/wwwroot/mm-chips.com/vendor/guzzlehttp/promises/src/Promise.php ( 8.75 KB )
/www/wwwroot/mm-chips.com/vendor/guzzlehttp/promises/src/Is.php ( 0.92 KB )
/www/wwwroot/mm-chips.com/vendor/php-packages/icku-utils/src/Utils/Caster.php ( 9.86 KB )
/www/wwwroot/mm-chips.com/vendor/php-packages/icku-gateway/src/Api/Entities/ProductSimpleEntity.php ( 1.81 KB )
/www/wwwroot/mm-chips.com/vendor/php-packages/icku-gateway/src/Api/Entities/ProductEntity.php ( 8.06 KB )
/www/wwwroot/mm-chips.com/vendor/php-packages/icku-utils/src/Utils/Collection.php ( 10.39 KB )
/www/wwwroot/mm-chips.com/vendor/php-packages/icku-gateway/src/Api/Casts/MoneyCast.php ( 0.58 KB )
/www/wwwroot/mm-chips.com/vendor/php-packages/icku-utils/src/Contracts/CastsAttributes.php ( 0.49 KB )
/www/wwwroot/mm-chips.com/vendor/php-packages/money/src/Money.php ( 19.90 KB )
/www/wwwroot/mm-chips.com/vendor/php-packages/money/src/Currency.php ( 10.12 KB )
/www/wwwroot/mm-chips.com/vendor/php-packages/money/config/money.php ( 54.21 KB )
/www/wwwroot/mm-chips.com/vendor/php-packages/icku-gateway/src/Api/Enums/Platform.php ( 0.78 KB )
/www/wwwroot/mm-chips.com/vendor/php-packages/icku-gateway/src/Api/Entities/ManufacturerEntity.php ( 1.63 KB )
/www/wwwroot/mm-chips.com/vendor/php-packages/icku-utils/src/Utils/UrlGenerator.php ( 7.34 KB )
/www/wwwroot/mm-chips.com/vendor/php-packages/icku-gateway/src/Api/Entities/CategoryEntity.php ( 3.59 KB )
/www/wwwroot/mm-chips.com/vendor/php-packages/icku-gateway/src/Api/Endpoints/CurrencyEndpoint.php ( 0.39 KB )
/www/wwwroot/mm-chips.com/vendor/php-packages/icku-gateway/src/Api/Entities/RateEntity.php ( 16.86 KB )
/www/wwwroot/mm-chips.com/vendor/desarrolla2/cache/src/Packer/SerializePacker.php ( 1.62 KB )
/www/wwwroot/mm-chips.com/vendor/desarrolla2/cache/src/Packer/PackerInterface.php ( 0.93 KB )
/www/wwwroot/mm-chips.com/app/index/model/Products.php ( 0.34 KB )
/www/wwwroot/mm-chips.com/vendor/php-packages/icku-gateway/src/Api/Endpoints/CategoryEndpoint.php ( 6.96 KB )
/www/wwwroot/mm-chips.com/vendor/php-packages/icku-gateway/src/Api/Entities/AllCategoriesEntity.php ( 1.10 KB )
/www/wwwroot/mm-chips.com/vendor/topthink/think-orm/src/db/Raw.php ( 1.39 KB )
/www/wwwroot/mm-chips.com/vendor/topthink/think-multi-app/src/Url.php ( 7.52 KB )
/www/wwwroot/mm-chips.com/vendor/topthink/framework/src/think/route/Url.php ( 14.66 KB )
/www/wwwroot/mm-chips.com/vendor/topthink/framework/src/think/Response.php ( 8.60 KB )
/www/wwwroot/mm-chips.com/vendor/topthink/framework/src/think/response/View.php ( 3.27 KB )
/www/wwwroot/mm-chips.com/vendor/topthink/think-view/src/Think.php ( 8.42 KB )
/www/wwwroot/mm-chips.com/vendor/topthink/think-template/src/Template.php ( 47.01 KB )
/www/wwwroot/mm-chips.com/vendor/topthink/think-template/src/template/driver/File.php ( 2.33 KB )
/www/wwwroot/mm-chips.com/runtime/index/temp/68794d695df5b06e23e6125a71533450.php ( 44.85 KB )
/www/wwwroot/mm-chips.com/vendor/topthink/framework/src/think/facade/Lang.php ( 1.68 KB )
/www/wwwroot/mm-chips.com/vendor/topthink/think-trace/src/Html.php ( 4.49 KB )

CONNECT:[ UseTime:0.001408s ] mysql:host=127.0.0.1;port=3306;dbname=mm_chips_com;charset=utf8mb4
SHOW FULL COLUMNS FROM `moban_site` [ RunTime:0.003408s ]
SELECT * FROM `moban_site` WHERE `lang` = 'en' LIMIT 1 [ RunTime:0.001523s ]
SHOW FULL COLUMNS FROM `moban_columns` [ RunTime:0.002296s ]
SELECT * FROM `moban_columns` WHERE `state` = 1 AND `lang` = 'en' ORDER BY `sort` ASC [ RunTime:0.000921s ]
SHOW FULL COLUMNS FROM `moban_news` [ RunTime:0.002918s ]
SELECT * FROM `moban_news` WHERE `lang` = 'en' AND `state` = 1 LIMIT 1 [ RunTime:0.000986s ]
SHOW FULL COLUMNS FROM `moban_news_category` [ RunTime:0.002070s ]
SELECT * FROM `moban_news_category` WHERE `lang` = 'en' ORDER BY `id` ASC [ RunTime:0.000664s ]
SHOW FULL COLUMNS FROM `moban_single_page` [ RunTime:0.002115s ]
SELECT * FROM `moban_single_page` WHERE `id` IN (0,28,34,73) AND `state` = 1 AND `lang` = 'en' [ RunTime:0.000938s ]
SELECT * FROM `moban_single_page` WHERE `id` IN (0,2,68) AND `state` = 1 AND `lang` = 'en' [ RunTime:0.000657s ]
SHOW FULL COLUMNS FROM `moban_link` [ RunTime:0.002016s ]
SELECT * FROM `moban_link` WHERE `state` = 1 ORDER BY `sort` ASC [ RunTime:0.000619s ]
SHOW FULL COLUMNS FROM `moban_banner` [ RunTime:0.003419s ]
SELECT * FROM `moban_banner` WHERE `state` = 1 AND `lang` = 'en' ORDER BY `sort` DESC,`id` DESC [ RunTime:0.002349s ]
SHOW FULL COLUMNS FROM `moban_products` [ RunTime:0.003576s ]
SELECT * FROM `moban_products` WHERE `recommend` = 1 AND `state` = 1 ORDER BY `sort` DESC,`id` DESC LIMIT 8 [ RunTime:0.001325s ]
SELECT * FROM `moban_products` WHERE `hot` = 1 AND `state` = 1 ORDER BY `sort` DESC,`id` DESC LIMIT 18 [ RunTime:0.000779s ]
SELECT * FROM `moban_products` WHERE `popularize` = 1 AND `state` = 1 ORDER BY `sort` DESC,`id` DESC LIMIT 50 [ RunTime:0.000733s ]
SELECT category_id,count(id) total FROM `moban_products` WHERE `state` = 1 GROUP BY `category_id` [ RunTime:0.000747s ]
SHOW FULL COLUMNS FROM `moban_category` [ RunTime:0.002237s ]
SELECT * FROM `moban_category` ORDER BY `id` ASC [ RunTime:0.000698s ]
SELECT * FROM `moban_news` WHERE `state` = 1 AND `is_draft` = 0 AND `recommend` = 1 AND `lang` = 'en' ORDER BY `sort` DESC,`id` DESC LIMIT 4 [ RunTime:0.009921s ]

0.734711s